SEARCH RESULTS FOR “high”

Build­ing with Fox Blocks ICFs pro­vides you with a high per­for­mance wall sys­tem for the foun­da­tion and above grade walls. Build­ing any high per­for­mance home, with either ICFs or con­ven­tion­al wood fram­ing, has many fac­tors that define the end cap­i­tal costs.

What addi­tion­al mate­ri­als and labor are required to make a con­ven­tion­al foun­da­tion equiv­a­lent to an Fox Blocks ICF foun­da­tion which exceeds ener­gy code require­ments in most loca­tions? Con­ven­tion­al wood fram­ing requires con­sid­er­ably more mate­r­i­al, insu­la­tion and atten­tion to air seal­ing to make it qual­i­fy and per­form as a high per­for­mance wall. All of this, for con­ven­tion­al con­struc­tion, adds mate­r­i­al and labor costs to the over­all project. Fox Blocks ICFs pro­vide a sim­ple method to build high per­for­mance walls that pro­vide ongo­ing ben­e­fits from the high insu­la­tion val­ues and mass con­crete walls that are ener­gy-effi­cient and pro­vide cost sav­ings for the life cycle of the build­ing.

Com­par­ing cost per square foot between con­ven­tion­al con­struc­tion and ICFs for a high per­for­mance build­ing, is like com­par­ing apples to oranges. To devel­op con­struc­tion costs, more detailed infor­ma­tion is required, for instance the num­ber and size of open­ings, the shape and size of the home, the region­al costs for mate­r­i­al and labor, etc. If you have a project you’d like us to review and pro­vide a mate­r­i­al esti­mate, Fox Blocks would be hap­py to have one of our rep­re­sen­ta­tives con­tact you. Please com­plete and sub­mit a lead infor­ma­tion sheet on the web­site or call Cus­tomer Ser­vice.

A stud find­er typ­i­cal­ly uses the den­si­ty of mate­ri­als to locate studs. The polypropy­lene (plas­tic) web mate­r­i­al will show up on high qual­i­ty den­si­ty stud find­ers. Note, the webs in Fox Blocks are spaced at 8″ (200 mm) on cen­ter and will be con­tin­u­ous ver­ti­cal­ly on each side of the wall.

ICFs pro­vide a rein­forced con­crete wall which is designed to spe­cif­ic engi­neer­ing prin­ci­ples. Typ­i­cal res­i­den­tial con­struc­tion, per the applic­a­bil­i­ty lim­its in the build­ing code, allows walls 10′ (3 m) high or less between lat­er­al sup­ports (floor and roof con­nec­tions). Below grade walls must have a min­i­mum 6″ (150 mm) con­crete core. In some regions, an 8″ (200 mm) con­crete core is the min­i­mum allowed thick­ness for below grade walls.

The 4″ (100 mm) form can­not be used below grade as a foun­da­tion wall. The 4″ (100 mm) form may be used for above grade walls up to a max­i­mum of 10′ (3.0 m).

The 6″ (150 mm) form, above grade, is lim­it­ed to approx­i­mate­ly 14′ (4.2 m) in height. Walls high­er than 14′ (4.2 m) must use an 8″ (200 mm) or larg­er form.

Typ­i­cal res­i­den­tial con­struc­tion will use 6″ or 8″ con­crete core size blocks. Project spe­cif­ic engi­neer­ing may allow for some core thick­ness to span ver­ti­cal­ly high­er than these pro­posed guide­lines.