Does expanded polystyrene (EPS) present a serious fire hazard?
The EPS in an Fox Blocks has a flame retar­dant that allows the forms to be flame resis­tant. The EPS will melt when exposed to sus­tained tem­per­a­tures over 300°F (149°C). The igni­tion point of the melt­ed styrene is 600°F (315°C) (wood is approx­i­mate­ly 500°F (260°C). Fox Blocks have been test­ed to meet the build­ing code require­ments for flame spread and smoke devel­op­ment, plus Fox Blocks may be used as fire resis­tant rat­ed wall assem­blies in schools and hos­pi­tals.
Can you vibrate or consolidate the concrete in ICFs?
Yes, con­sol­i­da­tion of the con­crete is one of the key ele­ments in the place­ment of con­crete in an ICF wall. Fox Blocks rec­om­mends inter­nal vibra­tion with a pen­cil vibra­tor, quick­ly in and slow­ly out.
Can masonry be installed on the exterior walls?
Yes, Fox Blocks has a brick ledge form and the xLer­a­tor ledge rein­force­ment that is designed to sup­port mason­ry. Fox blocks also has a tieKey acces­so­ry which is a specif­i­cal­ly made as a mason­ry tie, to be insert­ed through the form into the con­crete.
Does EPS ‘off gas’?
EPS does not off-gas. Fox Blocks forms do not and nev­er have con­tained any CFC or HCFC prod­ucts. The forms are made by a steam process that uti­lizes pen­tene gas’ as a blow­ing agent. The blow­ing agent dis­si­pates from the prod­uct with­in 48 hours of man­u­fac­tur­ing. Fox Blocks forms are odor­less, do not dete­ri­o­rate, and do not off gas.
Are there different types of Expanded Polystyrene (EPS)?
EPS is list­ed basi­cal­ly under four prop­er­ty clas­si­fi­ca­tions – Type I, II, III and IV. The char­ac­ter­is­tics are based on the den­si­ty of the mold­ed foam which defines the prod­uct type. Fox Blocks ICFs are man­u­fac­tured as a Type II EPS with a den­si­ty of approx­i­mate­ly 1.5 pounds per cubic foot.
What is a ‘blow-out’?

A blow-out’ is a break in the form, gen­er­al­ly due to the pres­sure from the liq­uid con­crete dur­ing the con­crete place­ment and/​or con­sol­i­da­tion. Fox Blocks ICFs are designed to main­tain a high safe­ty fac­tor of pres­sure from the liq­uid con­crete. Dam­aged forms or fail­ure to sup­port areas where forms have been cut leav­ing a large area of EPS between the web sup­ports may cause a blow-out. Over con­sol­i­da­tion may also cause a blow-out.

Fox Blocks rec­om­mends the Pre-Place­ment Check­list be reviewed for all wall assem­blies pri­or to the place­ment of con­crete, to find poten­tial prob­lem areas and install addi­tion­al strap­ping or sup­port to pre­vent blow-outs. Gen­er­al­ly, for an Fox Blocks form, the size of a blow-out may be lim­it­ed to the EPS between the webs, 6″ or 8″ wide by the height of one form. If a blow-out occurs, the con­crete pour moves to anoth­er area on the wall, the hole is patched by replac­ing the EPS, installing wood sup­port over the area, and then resum­ing the pour.

How do frame in openings?
Fox Blocks has devel­oped the Fox Buck specif­i­cal­ly to frame open­ings such as win­dows and doors. The Fox Buck pro­vides insu­la­tion around the open­ing plus sup­port for the attach­ment of the win­dow or door.